DP-TPS-TX220
SKU: 91540018
DiscontinuedTPS (HDBaseT™) DisplayPort Extender with Local Monitor Out
DP-TPS-TX210 can transmit universal video, audio and control up to a 170 meter distance over a single CAT cable. The extender was designed to handle DP1.1 digital video signals and analog stereo audio from local inputs or DP Embedded Audio up to eight channel PCM or HBR audio.
Details
Specification Table
| Specifications | |
| Resolution: | Up to 4K UHD 3840×2160@30Hz, 1600x1200@60Hz, FullHD 1920x1080@60Hz |
| Digital audio formats: | Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats |
| Input cable equalization: | Adaptive, automatic |
| EDID emulation: | Yes, Advanced EDID Management |
| EDID memory: | 120 factory preset, 15 user programmable |
| HDCP pass-through: | Yes |
| RS-232 pass-through: | Yes, configurable |
| RS-232 (control option): | 9600, 19200, 38400, 57600, 115200 Baud Rx,Tx (through CATx)(default: 57600) |
| Local power: | Universal power adaptor, DC 12V 2.5A |
| Power over TPS: | DC 48V 1 A |
| Power consumption: | 8W (typ) |
| Enclosure: | 1 mm metal |
| Dimensions: | 221 W x 100.4 D x 26 H mm |
| Compliance: | CE |
| Warranty: | 3 years |
| Connectors | |
| Digital video input: | DisplayPort connector |
| Digital video output: | HDMI connector |
| Audio input: | 3.5 mm stereo jack |
| Ethernet: | 1 x RJ45 |
| GPIO: | 8-pole PHOENIX |
| IR: | 3.5 mm jack |
| TPS output: | 1 x RJ45 |
| Serial port: | 3-pole PHOENIX |
| Power: | Locking DC connector (2.1 / 5.5 mm) |
| Max cable lengths with the available firmware versions | ||||
| Resolution | Pixel clock rate | Cable lengths (Auto / LR link mode) | ||
| CAT5e AWG24 | CAT7 AWG26** | CAT7 AWG23 | ||
| 1024x768@60Hz | 65 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1280x720p@60Hz | 73,8 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1920x1080p@60Hz / 24bpp | 148,5 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1920x1200@60Hz | 152,9 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
| 1600x1200@60Hz | 162 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
| 1920x1080@60Hz / 36bpp | 223 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| 3840x2160@30Hz UHD | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| 4096x2160@30Hz 4K | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| *with long reach firmware option. Long reach firmware supports pixel clock frequencies up to 148,5 MHz. **Distances are 20% shorter if remote powering used. AWG 26 cables are not recommended with remote powering. |
||||
Features
Can be remote powered through CATx
PoE PD
HDMI 1.3, HDCP 1.1 and DVI 1.0
Built-in Event Manager
Supports HDMI 3D signal formats
(frame packing, side-by-side and top-bottom)
1920x1080@120Hz/4:4:4
4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 resolutions
HDCP enable/disable function, input
HDCP 1.4 compliant
Uncompressed video up to 9Gbps
(300 MHz pixel clock)
Other Features
No signal latency, zero frame delay
TPS link quality
and cable length monitoring
Adjustable analog audio settings
(volume, gain, balance)
Audio embedding
or replace original audio
Firmware upgrade through Ethernet
Cross compatible
with TPS series LWR extenders and I/O boards
Extension distance up to 170 meters
(with CAT7 S/FTP AWG23 cable, 1920x1080p60)
HDBaseT compatible
Ethernet extension (100 Mbps)
Advanced EDID Management
Pixel Accurate Reclocking
Command injection on RS-232 and IR
GPIO control ports
Multiple TCP/IP connections
Intuitive control software
for device configuration
Supports HDMI 4K signal formats
(4K UHD @30Hz RGB 4:4:4, @60Hz YUV 4:2:0, up to 9 Gbps)
No video compression
Built-in video test generator
Bi-directional RS-232 and IR
pass-through and control
Twist-and-lock DC power connector
Frame Detector
(analyze detailed video timings)
Supports embedded audio formats
(including PCM, Dolby Digital and DTS)
Compatible
with Mac laptop and desktop computers
External universal power adaptor
3,5mm audio jack input
Mounting options
for rack, furniture or truss
Extends DP 1.1 + Audio + Ethernet
RS-232 + IR over one CAT5/6/7 cable
