DVI-HDCP-TPS-RX97
SKU: 91540025
DiscontinuedInterested in this product?
DVI-HDCP-TPS-TX97 and DVI-HDCP-TPS-RX97 twisted pair HDBaseTTM extenders transfer uncompressed 4K/UHD video with embedded audio (up to eight channel PCM or HBR audio) over a single CATx cable.
Details
Recommended Alternative
1 product
Specification Table
| Specifications | |
| Data rate: | 3.4 Gbps per color |
| Resolution: | All HDMI 1.4a resolutions supported |
| Equalization: | adaptive, automatic |
| EDID support: | transparent |
| HDCP pass-through: | yes |
| Ethernet pass-through: | yes |
| RS-232 pass-through: | yes |
| IR pass-through: | yes |
| Overall signal delay: | 10µs (including 100m CATx cable) |
| Power: | universal power adaptor, DC 12 V 2.5 A |
| Power consumption (-TX): | 3.6 W (typ) 4.2 W (max) |
| Power consumption (-RX): | 5.3 W (typ) 6.1 W (max) |
| Enclosure: | 1 mm metal |
| Dimensions: | 100.4 W x 100.4 D x 26 H mm |
| Net weight: | 330 g / product |
| Compliance: | CE |
| Warranty: | 3 years |
| Connectors | |
| TX input, RX output: | HDMI connector |
| TX output, RX input: | RJ45 (TPS interface) |
| Ethernet: | RJ45 |
| IR in, out: | 3.5 mm TRS connector (1/8'' mini-jack) |
| Serial port: | 9-pole D-sub |
| Power: | locking DC connector (2.1 / 5.5 mm) |
| Max Cable Lengths with the Available Firmware Versions | ||||
| Resolution | Pixel clock rate | Cable lengths (Auto / LR link mode) | ||
| CAT5e AWG24 | CAT7 AWG26** | CAT7 AWG23 | ||
| 1024x768@60Hz | 65 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1280x720p@60Hz | 73,8 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1920x1080p@60Hz / 24bpp | 148,5 MHz | 100 m / 130 m* | 90 m / 120 m* | 120 m / 170 m* |
| 1920x1200@60Hz | 152,9 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
| 1600x1200@60Hz | 162 MHz | 100 m / NA | 90 m / NA | 120 m / NA |
| 1920x1080@60Hz / 36bpp | 223 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| 3840x2160@30Hz UHD | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
| 4096x2160@30Hz 4K | 297 MHz | 70 m / NA | 70 m / NA | 100 m / NA |
* with Long reach operation mode which supports pixel clock frequencies up to 148,5 MHz
** when remote powering is used with AWG26 cables, distances are 20% shorter.
Features
Can be remote powered through CATx
PoE PD
Supports HDMI 3D signal formats
(frame packing, side-by-side and top-bottom)
Supports deep color signals
(24/30/36 bit RGB/YCbCr 4:4:4)
1920x1080@120Hz/4:4:4
4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 resolutions
HDMI 1.4, HDCP 1.4 and DVI 1.0
HDCP 1.4 compliant
HDCP 2.2 compliant
(transparent pass-through)
Uncompressed video up to 9Gbps
(300 MHz pixel clock)
Other Features
No signal latency, zero frame delay
Selectable operation mode
Auto or forced Long Reach mode
Cross compatible
with TPS series LWR extenders and I/O boards
Supports all embedded audio formats
(including PCM, Dolby Digital & DTS high bitrate audio)
Extension distance up to 170 meters
(with CAT7 S/FTP AWG23 cable, 1920x1080p60)
HDBaseT compatible
Ethernet extension (100 Mbps)
Selectable IR output mode
for emitter or wired connectivity
Transparent EDID pass-through
Supports HDMI 4K signal formats
(4K UHD @30Hz RGB 4:4:4, @60Hz YUV 4:2:0, up to 9 Gbps)
No video compression
Bi-directional RS-232
and IR extension (pass-through)
Status LEDs
Live, TPS link, signal and HDCP detect
Twist-and-lock DC power connector
Low power mode (standby)
External universal power adaptor
Mounting options
for rack, furniture or truss
Extends DVI or HDMI 1.4
#ERROR!
